SMT dopravníky a automatizace

Automatizované manipulační zařízení a dopravníky s využitím v SMT průmyslu.

NUTEK je výrobcem automatizovaných manipulačních zařízení a dopravníků s využitím v SMT průmyslu. Historie Nutek Private Limited se píše od roku 1989 kdy byla založena v Singapuru. Díky spolehlivým výrobkům a inovativním řešením získal NUTEK v průběhu několika let u svých zákazníků vysokou reputaci a dosáhl stabilního růstu. Díky tomu se stal světovou jedničkou ve výrobě automatizovaných systémů pro elektronický průmysl.

Vše Traceability Loaders & unloaders Conveyors Traffic controllers Buffers Dual track E-Series Semicon series Magazine racks
 


Laser marking system series 3

Laser marking system series 3 The unit is designed to accurately mark PCB’s within a production line or can be used as a stand alone cell. A so called “flying laser” concept is used which means that PCB is locked in its marking position while the CO2 laser is moved using servo controlled X-Y axis. The number of markings and their positions are easily programmable in Windows™ based software. Optional an integrated inverter is available for double-sided marking.

Specifikace (EN)  pdf

laser-marking-system-series-3

Laser marking system series 5

Laser marking system series 5 The unit is designed to accurately mark PCB’s within a production line or can be used as stand alone cell. The usage of an 3-axis galvo-head provides a large marking area (350 x 350mm) without having to use an X-Y gantry. This results in very short cycle times for a large number of markings. The type, number of markings and their positions are easily programmable in Windows™ based software. Optional an integrated inverter is available for double-sided marking.

Specifikace (EN)  pdf

laser-marking-system-series-5

Labelling system series 3

Labelling system series 3 The unit is designed to accurately apply labels on PCB’s or on top of components. It uses a X-Y gantry to move the applicator head between the label printer and the placement position. The PCB is clamped in position and supported from the bottom by manual positioned magnetic support pins while one or more labels are applied at any desired position. The number of labels and their positions are easily programmed in Windows™ based software.

Specifikace (EN) 

labelling-system-series-3

Scan station

Scan station The Scan station integrates the ‘Adomo’ (Advanced Optical Modulation) system from the company MODI. This system enables the inspection of large areas with high resolution and short cycle times using stepper controlled mirror heads within the Adomo module. One application for this is PCB scanning for multiple position 1D/2D traceability markings.

The camera field of view can deflect from one position to another with an accuracy of 1 µm within just a few milliseconds. The process is controlled by an integral microprocessor that not only enables the precise movement of the mirror to each position, but also controls the camera synchronisation. Depending on the application, the system can be equipped with cameras with resolutions of 0.5-4 Megapixels.

Specifikace (EN)  pdf

scan-station