Dávkování 1K / 2K materiálů

Německá firma Scheugenpflug AG je již 20 let předním dodavatelem dávkovacích systémů a strojů ...

... pro automatizaci procesů nanášení jednosložkových i vícesložkových materiálů jak při běžných podmínkách atmosférického tlaku, tak ve vakuovém prostředí.

Vše Dávkovací hlavy Zásobníky Dávkování pod vakuem Dávkování při běžném atm. tlaku
 


A90 C | A90 B | A90 T

A90 C | A90 B | A90 T Small, Compact and Space-Saving

The models of the A90 family provide an entry into automated material feeding. These systems are also suitable for applications with a very low material consumption and for dispensing materials that do not place high demands on homogenisation, heating and evacuation. Suitable models and versions are available for various requirements. Where material is fed from standard cartridges, the A90 C system is the right choice. These systems work with compressed air, which presses onto the cartridge and feeds the dispensing material from the cartridge into the metering and dispensing system. At the same time, the piston of the pneumatic cylinder moves, which ensures smooth dispensing of the material. The operator is notified when the cartridge filling level drops below a defined minimum value and when it is empty. These systems provide a reliable, trouble-free supply of material at an affordable price.

Specifikace (EN)  pdf
Více info  www

a90

A220

A220 Docking – Reliable, Clean and Free From Bubbles

The rugged material feeding units A280 and A220 are used for highly viscous and – depending on the pump model – non- or highly abrasive dispensing media. The drum (hobbock, pail) is positioned on the hobbock drawer. After closing the safety door, the operator initiates docking via the controls. This lowers the vacuum barrel follower plate into the drum, where the follower plate attaches itself to the material surface quickly and of its own accord (< 5 min.) and without air inclusions. The material feed starts fully automatically. When the barrel is nearly or completely empty, a filling level sensor alerts the operator. The empty drum, complete with the disposable follower plate is discarded. This avoids the risk of introducing residual material into the drum when docking onto the next barrel with a new vacuum follower plate, as often happens when conventional rubber follower plates are used incorrectly. Two models are available: the A220 for highly-viscous, non-abrasive dispensing media, and the A280 for highly viscous and abrasive materials. The difference between the two lies in their feed pumps.

Specifikace (EN)  pdf
Více info  www

a220

A280

A280 Docking – Reliable, Clean and Free From Bubbles

The rugged material feeding units A280 and A220 are used for highly viscous and – depending on the pump model – non- or highly abrasive dispensing media. The drum (hobbock, pail) is positioned on the hobbock drawer. After closing the safety door, the operator initiates docking via the controls. This lowers the vacuum barrel follower plate into the drum, where the follower plate attaches itself to the material surface quickly and of its own accord (< 5 min.) and without air inclusions. The material feed starts fully automatically. When the barrel is nearly or completely empty, a filling level sensor alerts the operator. The empty drum, complete with the disposable follower plate is discarded. This avoids the risk of introducing residual material into the drum when docking onto the next barrel with a new vacuum follower plate, as often happens when conventional rubber follower plates are used incorrectly. Two models are available: the A220 for highly-viscous, non-abrasive dispensing media, and the A280 for highly viscous and abrasive materials. The difference between the two lies in their feed pumps.

Specifikace (EN)  pdf
Více info  www

a280

A310

A310 Homogenous and Bubble-Free – Superior Quality for Self-Levelling Dispensing Materials

The all-round system A310 simultaneously prepares and feeds the dispensing material, while temperature control helps optimise its viscosity. Evacuation removes any air trapped in the material already during preparation to ensure bubble-free dispensing. Circulation of the dispensing medium prevents sedimentation of filler materials to maintain the consistency of the dispensing material’s properties. The agitation and circulation intensity in these systems can be adapted to the material. A range of models and optional equipment provides the ideal features and equipment level for each application. Especially with highly-filled abrasive media, our systems offer an unsurpassed service life. With the Scheugenpflug SCP200, this system features a self-explanatory, by touch screen display easy to operate control unit.

Specifikace (EN)  pdf
Více info  www

a310

A310 TP 05L/01L

A310 TP 05L/01L For Small Quantities and Highly Viscous Material

For dispensing and/or providing only small quantities (for example highly sensitive and/or expensive dispensing materials), the model A310 TP05/TP01 is the right choice. Vacuum generation here is by a diaphragm pump; in every other respect the system has the same performance features and equipment options as its bigger counterparts.

Specifikace (EN)  pdf
Více info  www

a310-tp05l

A310 TP

A310 TP Power for Higher Viscosity

For materials that are too viscous to flow or fill the large 250 cm³ piston pump efficiently, the Top Pump version is the answer. Here the feed pump is integrated in the material tank. This configuration assists the pump in feeding the highly viscous dispensing material with its limited flowability into the dispenser after it has been evacuated or prepared. Also for lower preparation and feeding volumes, this model is a good choice.

Specifikace (EN)  pdf
Více info  www

a310-tp

Barrel Agitator Station

Barrel Agitator Station Moisture and Bubbles in Large Drums – no longer an issue.

Barrel agitator stations are used in applications with a high material consumption and – in combination with the material preparation and feeding system A310 – ensure a homogenous dispensing material with the right temperature. The electrically powered agitator station is equipped with a lifting unit, a filling level monitor and an optional vacuum controller and is ideally suited for stirring and heating liquid dispensing media. The 200 l barrel can be fully evacuated, allowing a comprehensive preparation of materials that are sensitive to moisture also from large barrels. Loss of material through damage from moisture in 200 l barrels – for example PUR – is therefore a thing of the past. The barrel agitator station, including agitation and filling times, is controlled directly through the A310. Where several functions are required, the barrel agitator station can also be operated as a stand-alone system with its own SCP200 controller.

Více info  www

bas

Vacuum Barrel Follower Plate for A220/A280

Vacuum Barrel Follower Plate for A220/A280 Ideal for Highly Viscous Materials

The patented vacuum barrel follower plate has been developed especially for feeding highly viscous dispensing materials from a hobbock or pail. It is used in the A220 and A280. This patented synthetic plate ensures a fast barrel changeover through clean, bubble-free docking. Emptying the barrel almost down to the last drop, this follower plate also has an economic benefit.

Specifikace (EN)  pdf
Více info  www

vbfp